Car Tank Sucker Petrol Oil Transfer Car Pump With 150cm Hose Manual Pump

Gasoline oil absorber tank deflector oil suction pipe 150cm manual oil pump-silver
Description:
The hose is made of PVC material, which is flexible and corrosion-resistant, and the water flow is clear and clear at a glance.
Using the suction pump, you can make small oil changes, pour gasoline into the tank, or refill the tank.Gasoline, petroleum water, etc. Widely used in common liquids such asEasy to use, just put the oil inlet pipe under the oil tank, insert the oil discharge pipe into the prepared oil tank, press the rubber ball 3-5 times, the liquid will flow out automatically.
Fast oil output, easy to use, easy to use, easy to carry
Material: rubber + aluminum alloy.
Size: Approx. 26.6 x 17.8 x 6.4 cm / 10.5 x 7.0 x 2.5 inchesTube inner diameter 16 mm; outer diameter 20 mm.
Hose length: 150cm
Features: oil resistance, aging resistance. Opening pressure: 0.2 bar.
Working pressure range: 0.2-6 bar.
Temperature range: -30°C to +130°C.
Package includes:
1x Suction Ball
1 x Hose
2 Valve Clips


Remarks:
Arrows depicting inlet and outlet tubes. Disconnect the pipe.
Insert the inlet hose into the tank and tap the bottom of the tank.
Insert the hose into the prepared oil drum.

Squeeze the rubber ball 3-5 times. .Then the liquid flows automatically.
Note:
This hand pump is suitable for tanks without anti-theft oil filters.
The oil inlet height is higher than the oil outlet height.
Wash immediately after use to avoid clogging the tube.

Key Features

Material: rubber + aluminum alloy.
Size: Approx. 26.6 x 17.8 x 6.4 cm / 10.5 x 7.0 x 2.5 inches
Tube inner diameter 16 mm; outer diameter 20 mm.
Hose length: 150cm
Features: oil resistance, aging resistance. Opening pressure: 0.2 bar.
Working pressure range: 0.2-6 bar.
Temperature range: -30°C to +130°C.

What's In the Box

1x Suction Ball

1 x Hose

2 Valve Clips