Raspberry Pi 4 0.96 Inch OLED I2C 4-pin LCD Screen Module Displays CPU Temperature IP Hard Disk Information For Arduino STM32

Raspberry Pi 4 0.96 inch OLED I2C 4-pin LCD Screen Module Displays CPU Temperature IP Hard Disk Information for Arduino STM32

Note: Please tear off the upper protective film of the case.

Introduction:

It can be used for the Raspberry Pi 2B\3B\3B+\4B full range of development boards, for Arduino, C51, STM32 and other platforms. The Raspberry Pi provides programs that can display CPU, temperature, memory, hard disk occupation, IP addre and other information.

The OLED screen pin header has been soldered, and the finished line is optional, which can be directly connected to the Raspberry Pi.

Description:

Display color: blue

Size: 0.96(inch)

Type: OLED

OLED driver : SSD1306

OLED driver : SSD1306

Module interface: IIC, ①-VCC, ②-GND, ③-SCL, ④-SDA

Effective display area: 21.744x10.864(mm)

Module size: 27.3x27.8(mm)

Viewing angle: >160°

Working temperature: -20℃~60℃

Storage temperature: -30℃~70℃

Working voltage: 3.3V / 5V

Power consumption: 0.06W

Product weight (including packaging): 8(g)

Instructions for use:

1. Correct wiring

Pins on the module Raspberry Pi GPIO

VCC 5V/3V (red wire)

GND GND (black wire)

SCL SCL (yellow line)

SDA SDA (blue line)

2. Install the WinSCP tool on the computer, connect to the Raspberry Pi and download the data to the home/pi directory of the Raspberry Pi.

3. Compile the program file

gcc -o oled oled.c d1306_i2c.c -lwiringPi

Among them, the gcc compiler is called, -o means the generated file, followed by the generated file name, oled.c and d1306_i2c.c are the source programs, and -lwiringPi refers to the wiringPi library of the Raspberry Pi.

4. Run the program

./oled

At this point, you can see the CPU occupancy rate, CPU temperature, running memory occupancy rate, disk occupancy rate and IP addre of the Raspberry Pi displayed on the oled screen.

Shipping list:

1 x 4-pin 0.96 inch OLED display (optional acrylic bracket, cable)

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.

Key Features

Compatible With:Raspberry Pi
Accessory Type:LCD Screen
Origin:Mainland China

What's In the Box

1X Raspberry Pi 4 0.96 inch OLED I2C 4-pin LCD Screen Module Displays CPU Temperature IP Hard Disk Information for Arduino STM32