6V 5N Solenoid Push/Pull Open Frame Electromagnet Stroke
6V 5N Solenoid Push/Pull Open Frame Electromagnet Stroke
Get an estimate on delivery to your location.
- Pay by card, bank transfer or USSD at checkout
The 6V 5N Solenoid Push/Pull Open Frame Electromagnet Stroke is called "Push/Pull" because both shaft ends are available, so the solenoid can be used as pushing solenoid or pulling solenoid, depending on which shaft end is used for mechanical connection. But because of reluctance working principle the active moving direction when powering the coil is only unidirectional. Applications can be found in medical, laboratory and analytical equipment, e.g. in electrical pinch valves or in optical or semiconductor industry and lock applications
The 6V 5N Solenoid Push/Pull Open Frame Electromagnet Stroke is also suitable for vending machines, office facilities, transport equipment, appliances and much more. It can be fixed and connected to load easily and has heat up stablely to prolong life of product and ensure good performance.
Specification :
Input Voltage : 6V DC
Current: 300mA
Stroke: 10mm
Holding Force : 5N
Operating Temperature : -5 - 40C non-condensing
Operating Humidity : Relative humidity 45%-85% non-condensing
Saving Temperature : -45 - 75C non-condensing
Saving Humidity : Relative humidity 0%-95% non-condensing
