5V 1-Channel Infrared Remote Control Relay Switch Module

This is a 5V 1-Channel relay module board. The Relay Module receives the infrared remote control signal of two keys and output through the 5V 1-Channel Relay after decoded by the MCU. The load of the Relay are 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A, which can drive most household appliances or other devices.

This relay module is 5V active low, comes with a remote controllers.
The 5V 1-Channel Relay Module is low level triggered and suitable for IO port output.
It is a 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
It is also able to control various appliances and other equipments with large current.
The output contact rating: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A, which can drive most household appliances or industrial control.

Standard interface can be directly connected with microcontrollers.
With the LED indicator light (For Connection, disconnection).
The Relay has normally closed contact and normally open contact.
With the relay coil absorber diode protection.
Active-low signal input, VCC, GND power supply input terminal.
Adopts the opto-isolator, safe and reliable, high anti-interference.
With compact portable design for easy carry.
Applications: Support all MCU control, industrial circle, PLC control, household appliances control, smart home control, etc.

Specification:

Working voltage: 5V
Control distance: 8m
The Relay Board has the 3mm screw holes for easy installation.
Relay Module interfaces: VIN + Positive pole 5V, GND Negative electrode; the middle port of the three ports is Community port, the other two ports are normally open port and normal close port (the front end circuit of the relay output and input is insulative).
Color: Blue (Relay Module), Black (Remote Controller)