Fangpusun Charge Controller Mppt150/70-tr

Fangpusun solar charge controller MPPT150/70
Battery voltage 12v/24v/48v Auto Select (software tool needed to select 36V)
Rated charge current 70A
Maximum PV power, 12V 1a,b) 1000W
Maximum PV power, 24V 1a,b) 2000W
Maximum PV power, 48V 1a.b) 4000W
Maximum PV open circuit voltage 150V absolute maximum coldest conditions, 145V start-up and operating maximum
Maximum efficiency 98%
Self-consumption 10mA
Charge voltage absorption Default setting: 14.4 / 28.8 / 43.2 / 57.6V (adjustable)
Charge voltage float Default setting: 13.8 / 27.6 / 41.4 / 55.2V (adjustable)
Charge algorithm Multi-stage adaptive
Temperature compensation -16mV / resp.-32mV/
Protection Battery reverse polarity (fuse, not user accessible)
PV reverse polarity / Output short circuit / Over temperature
Operating temperature -30 to +60 (full rated output up to 40)
Humidity 95%, non-condensing
Data communication port and remote on-off VE. Direct (see the data communication white paper on our website)
Parallel operation Yes (not synchronized)
ENCLOSURE
Colour Blue (RAL 5012)
PV terminals 2) 35mm/AWG2 (Tr models), or Dual MC4 connectors (MC4 models)
Battery terminals 35mm/AWG2
Protection category IP43 (electronic components), IP22 (connection area)
Weight 3kg
Dimensions (H x W x D) Tr models: 200*250*96mm, MC4 models: 230*250*95mm
STANDARDS
Safety IEC 62109-1-2010
1a) If more PV power is connected, the controller will limit input power to thr stated maximum.
1b) PV voltage must exceed Vbat+5V for the controller to start. Thereafter minimum PV voltage is Vbat+1V