Super Multipurpose Led Detector Tester

LED TV Backlight Strip Multipurpose Tester Disassembly Free LCD TV Maintenance LED Strips BeadsTesting Tool Measurement Instrume

JUSTON Super Led Tester testing voltage and current of constant current drive board.

1. Testing LED strips, LED panels, single LED bead, COB lighting sources and so on.
2. Testing backlight of LED TV, displays, computers and so on.
3. Compatible with all the LED strips (high voltage or low voltage).
4. Manual adjusting the range of testing voltage (20-300V/DC) and current (20-150mA).
Adjusting voltage at open circuit (without loads) and adjusting current with loads or contact probes together.
5. No burn out when testing single LED bead with wrong polarity. (Set voltage around to 20V and the current switch to 1mA)
6. Testing voltage parameter of various of electronic components.
7. Testing LED light on vehicle.

Test Method without Disassembling the Screen

Cut off the power of TV, Unplug the interface sockets of the constant current plate and light bar, Insert the Red and Black pens of the tester into the anode and cathode of the interface of the LED light bar.
1. Multiple LED strips
Testing the voltage of each strips and record them. Compare the voltage of each strips, it is normal if the differences <2V or <3%.
2. Single LED strip
A. The LED strip is not on (need remove the screen to repair):
voltage = 0, SHORT CIRCUIT. Voltage ≥ 300V, OPEN CIRCUIT.
B. The LED strip is on (need the testing references of constant current driver board to determine the backlight is normal or not).

Test Method of Constant Current Driver Board

Testing situation: the LED strip of backlight is on with the tester, but it does not work with the constant current board;
A. Cut off the power of TV, unplug the interface sockets of the constant current plate and light bar;
B. Connect the constant current board with the tester using the cables in the kits on right polarity.
C. Insert the Red and Black pens of the tester into the anode and cathode of the interface of the LED light bar
D. Turn the power of TV on.
E. Testing voltage >30V, Current >30mA and keep stable, and the LED strip working normal, then the Constant current board is normal