Intelligent Temperature Controller Thermostat With NTC Sensor
Intelligent Temperature Controller Thermostat With NTC Sensor
Get an estimate on delivery to your location.
- Pay by card, bank transfer or USSD at checkout
DESCRIPTION
This is an incredibly high efficient thermostat controller.
With this module, you can intelligently control power to most types
of electrical device(refridgerator, Air condition, Kiln, Furnace,
Heater, Cold room etc) based on the temperature sensed by the included high
accuracy NTC temperature sensor. Although this module has an embedded
microcontroller no programming knowledge is required. 3 tactile switches
allow for configuring various parameters including on & off trigger
temperatures. The on board relay can switch up to a maximum of 240V AC
at 10A or 14V DC at 20A. Contactor should be incoporated for higher
power or current need. The current temperature is displayed in degrees
Centigrade via its 3 digit seven segment display and the current relay
state by an on board LED.
Specifications:
Temperature range :-50-110 °
Dimensions: 48.5 * 40mm
Temperature control mode: ON / OFF
Resolution:When temperature is 0.1°, the resolution is -9.9~99.9, other temperature segment is 1°
Control accuracy: 0.1 °
Hysteresis accuracy: 0.1°
Refresh rate: 0.5S
High temperature protection: 0-110°
Supply voltage: DC 12V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: DC 12V
Output power: 20A relay
Measurement input: NTC (10K 0.5%) Waterproof Sensor
Environmental requirements: -10 ~ 60 ° ,Humidity 20% -85%
Package Included:
1 x 12V Digital thermostat Temperature Control + sensor
