Mppt 60a Solar Charge Controller 12v 24v 48v
Mppt 60a Solar Charge Controller 12v 24v 48v
Get an estimate on delivery to your location.
- Pay by card, bank transfer or USSD at checkout
MPPT technology
1.Max input voltage of solar panel:150V
2.Regulatory mechanism of temperature compensation( Auto regulate the charging voltage according to the temperature sensors )
3.Built-in solar data monitoring interface(RS485)
4.Solar charging voltage can be regulated
5.LCD Display with backlight
6.Good heat dissipation effect with less noise
7.Cable specification:>=10 square millimetres(Copper cable)
8.Reverse protection,short circuit protection
9.Auto identify system voltage of 12V/24V/48V
10.Hanging style design makes it convenient to install
Working Mode
There are several common working mode of MPPT solar controller:
1. Button Mode (Manual switching load)
2. Light Controlled Mode (Load switch is controlled by solar panels
photosensitive control and timing control)
3. Light control turn on delay off mode.
4. Circulation model (With Clock Fuction)
5.MPPT charging mode,Maximum power point tracking automatically
Protection
*PV array short circuit
*over discharge Protection
*Discharge voltage protection
*IP21 Mechanical protection
*Load overload
*the input low voltage protection
*PV Lightning protection
*Battery reverse polarity
*The overcharger protection voltage
Application
MPPT Solar Power Controller of light and night away less than 10 ma power flow, ideal for small power solar products, such as solar street lamp light, streetlight, DC Load, illumination, solar power system and so on.
| Model | MPPT-60A | |
| charging mode | Controller or Host computer | |
| Maximum current of discharge | 12V/24V/48Vsystem | 60A |
| Discharge protection | 12V/24V/48Vsystem | fuse 100A/150A |
| Appointment of on-off mode | 12V/24V/48Vsystem | tomake an appointment time of on and off |
| Normally open, normally open control mode | 12V/24V/48Vsystem | Normally open or normally close |
| PV voltage control switch mode | 12V/24V/48Vsystem | PV voltage on, PV voltage off |
| PV voltage and time delay control switch mode | 12V/24V/48Vsystem | PV voltage on and time delay off |
| PV voltage and time delay | 12V/24V/48Vsystem | (Take a 12V battery for example) The default 10.5V (Can be adjusted on control interface) |
| Communication characteristics | ||
| RS485 communication interface | 12V/24V/48Vsystem | Select COM connecting type |
| Temperature protection | 85ºC | |
| Overheat protection | When the temperature is over 75,reduce the power output by decrease 3A each degree. | |
| audible noise | ≤40dB | |
| heat-dissipating | Temperature control system + Load control system | |
| metadata accessories | Imported materials,conform to EU standards,temperature can be chosen,electrolytic capacitor rated temperature is not lower than 105 degrees Celsius. | |
| smell | Do not produce peculiar smell and the smell of harmful to health | |
| environmental requirement | Meet the 2002/95/EC; No cadmium,hydride and fluoride | |
| attribute | ||
| Gross weight | 60A:3.5kg 80A/100A:4.2kg | |
| Electro Magnetic Compatibility(EMC) | En61000 | |
| Mechanical protection type | IP21 | |
| Environmental Requirement | ||
| humidity | 0~90% (Not condensation) | |
| Altitude | 0~3000m | |
| Ambient temperature | -20ºC ~+40ºC | |
| Storage temperature | -40ºC~+75ºC | |
| Atmospheric pressure | 70~106kPamppt | |
