Double Power Portable Household Mini Electric Sewing Machine

Max. Sewing Speed:

Selective Gear fast/slow

Overall Dimensions:

Approx.200*150*80MM(L*W*H)

Condition:

New

Stitch Formation:

Cover Stitch

Feed Mechanism:

Manual

Mechanical Configuration:

Flat-Bed

Type:

Mini Sewing Machine

Product effects: Lightweight sewing machine, in Japan as every essential goods, not the space, incorporating convenient, compact, great ability to work, can sew all the clothes, cotton two-speed design, fast slow a key to adjust and use. more convenient. Metal Gear high strength, noisy sound of a small, no-slip tooth, lightweight, sophisticated technology, the best fashion gift. Sewing machine parts and large general, the available battery or AC (110-220V) power supply from the distribution

Operation: 1, the hand wheel to drive the needle to its highest position, and then the back of the presser plate dial system instituted presser plate, and then into the fabric. 2, put the cloth presser plate, turn the hand wheel clockwise laps, you can turn on the switch to start sewing work. 3, the rear of the machine with a speed of two tranches, when the switch is pressed for quick file, press for slow play when the switch is on file. 4, the use of hand next boot, can be straight or turn naturally walk, do not pull, to prevent breakage or jumpers. 5, turn off the motor after the sewing is finished, turn the hand wheel needle jumping to the highest point, the line of cars pulled out the needle portion 15 ~ prefix = st1 ns = "urn: schemas-microsoft-com: office: smarttags" 25mm, the line cut. Note: Do not force a hard pull thread or cloth, to avoid damage to parts or needle. 6, put the needle presser plate dial system to enhance the presser plate, gently pull the fabric, the cloth sewn in turn, will lead the line, and then follow (Figure 2) tie.

Usage: 1, the hand wheel to drive the needle to its highest position, and then the back of the presser plate dial system instituted presser plate, and then into the fabric. 2, put the cloth presser plate, turn the hand wheel clockwise laps, you can turn on the switch to start sewing work. 3, the rear of the machine with a speed of two tranches, when the switch is pressed for quick file, press for slow play when the switch is on file. 4, the use of hand next boot, can be straight or turn naturally walk, do not pull, to prevent breakage or jumpers. 5, turn off the motor after the sewing is finished, turn the hand wheel needle jumping to the highest point, the line of cars pulled out the needle portion 15 ~ prefix = st1 ns = "urn: schemas-microsoft-com: office: smarttags" 25mm, the line cut. Note: Do not force a hard pull thread or cloth, to avoid damage to parts or needle. 6, put the needle presser plate dial system to enhance the presser plate, gently pull the fabric, the cloth sewn in turn, will lead the line, and then follow (Figure 2) tie.

Tie: 1, first threader set into the last row line; 2, will leave the line anti-penetration threading; 3, the threader wire pulled together from the last line 10mm long line to form a line graph ; 4, the antenna coil exported from the left and taut, tie steps. 5, or the end of the line will be left to wander the surface of the bottom surface of the cloth can be, they do not press 1 to 4 steps.