Micro/Type-C Dual USB 18650 Battery Charger Power Bank Module With LED
1 / 4
Micro/Type-C Dual USB 18650 Battery Charger Power Bank Module With LED
₦6,400
Secure checkoutRefund policy
Delivery
Get an estimate on delivery to your location.
Delivery to
Choose your state to see the delivery fee and when it arrives.
- Pay by card, bank transfer or USSD at checkout
Product Description
This is a mobile power module accessories with 18650 Lithium Battery Circuit board shell to meet the individual needs of your DIY, but you must understand basic electronic assembly.
Motherboard comes with protection function: Charging overcharge protection, over-discharge protection, overcurrent protection. Intelligent output device after charging full, automatically stop charging, to prevent mobile phones overcharge. Output voltage and current stable will not harm user devices.
Specifications:
1.Input Parameter: 5V/1A
2.Input Interface: V8 interface micro USB
3.Output Parameter: Double USB Output:5V/2.4A
4.Conversion Rate: 90% Average
5. Battery parallel requirements between 3.2-4.2V can work properly, the maximum can not exceed 200,000mA
Safe Design:
1.Power has designs of overcharge, overdischarge, short circuit protection. You don't need to worry about the time of charging
2.Intelligent Output. When equipment is fully charged, it will stop charging automatically to prevent from overcharging
3.Power has multipke safe designs.Output voltage and current is stable, never to damage user's device
4.Operating temperature range is wide (-20 Clecius—50 Clecius),can provide over tmperature protection
Function Feature: with a hightlight LED lamp (long press or double click power key can start)
Electricity Quantity Display:4 class LED light display electricity quantity, non-operating state will be intelligently off
Charging Display:
When charging 0-25%, one light is on, other light is off. 25%--50%, the second light flashes, the first light is continously on; 50%-- 75%, the third light flashes, front two lights are continuously on; 75%---100%, the fourth light flashes, front three lights are continuouly on. And four lights are on charging to 100%.
Mainboard Protection Function:
- Overcharge protection
- Overdischarge protection
- Overcurrent protection.
Installation:
- Circuit board B- connects power negative, B+ connects positive. Don't inversely connect as it will result in burning of this board. Power is series soldering, so please be sure of the insulation between power and circuit when installing the battery
- Double press the switch and flashlight LED light starts, then double pressing again turns it off
- Double press starts flashlight, then press once and light will be lighting.Then touch once start SOS mode and press one more time turns off LED.
Note:
- Do not reverse the polarities. Ensure that + is correctly connected to Positive and - is correctly connected to Negative to avoid damage
- Type-C port is only for input, not output
- The battery lead should not touch the circuit board, so as not to cause a short circuit.
Ratings & Reviews
Reviews come from verified buyers. Bought this item? Rate it from My account.No reviews yet. Be the first to review this item.
