Solar Charge Controller 12/24/36/48 60amps

Automatic PWM solar charge controller rated current 60A, auto switch DC 12V/24V/48V, PWM charge controller, fast charging time, with overvoltage, short circuit, overload protection, suitable for small solar energy system.

Directly charge the protection point voltage, this protection mode is also called emergency charge. Unlike the usual protection mode, this protection mode is fast charging. If the solar controller's battery is in a lower voltage state and cannot achieve higher voltage power conversion, then the controller will automatically activate this direct charge protection point voltage to charge its own battery. Its principle is mainly because of its own parameter value called control point. It is the value in the above table. When the controller is in the process of charging, the voltage value displayed by the controller is higher than the protection value. At this time, the controller will automatically start this mode to control the battery terminal voltage in time. At this point of protection, avoid overcharging.

Features

• Automatic identification system voltage 12V/24V or 24V/48V.
• Personalized LCD display and two-button operator and page.
• High performance PWM three-stage charging.
• You can choose to load the control template and set the streetlights in the world at night.
• With overvoltage, short circuit, overload, overcharge, over discharge protection.
• Accurate temperature compensation, correct charging and discharging voltages automatically extend battery life.
• The default setting can be reset when the controller with the parameter set is powered off.
• The positive and negative terminals of the input terminal are reversely connected to protect.